What are the main points of the laser pipe cutting machine
The function of the laser pipe Cutting Machine is mainly to cut pipes, such as iron pipes, stainless steel pipes, aluminum pipes, stainless steel pipes and galvanized pipes. At the same time, it can also cut special-shaped tubes, square tubes and flat tubes. When you use the laser pipe cutting machine, you also need to understand the main points of use. Today, CUT WIKI will give a specific introduction to the main points of the laser pipe cutting machine.
- 1. When you use the laser pipe cutting machine, you should pay attention to the speed change of the spindle, which can only be carried out after parking. When shifting, the gears must be completely meshed. If the machine tool is found to be abnormal, it needs to be stopped immediately for inspection.
- 2. Before using the laser pipe cutting machine to cut the pipe, the cutter should be adjusted first, and the work object needs to be clamped to pass. The length of the clamped part should be greater than fifty millimeters. After parking, you must use the baffle to fix it, and then clamp, loosen, and test forward and backward in order before you can continue to work.
- 3. When the machine tool is rolling, it is not allowed to touch any of its transmission parts. During the operation, it is necessary to tie the cuffs, and at the same time wear gloves to stop it, and the operator’s head should be behind the cutting direction.
- 4. If you are communicating measuring tools, props, lubricating and cleaning up the pipe head, you must stop the laser pipe cutting machine before proceeding. Do not do these things while it is still running. It is very dangerous.
- 5. When using the laser pipe cutting machine to cut the pipe head, be careful not to let the pipe head hurt people. When using the grinding wheel pipe cutting machine, you must first check to see if there are cracks and breakages, whether there is dampness, and whether the power cord is reliable.
When you use the laser pipe cutting machine, you must pay attention to the above content. When cutting long pipes, they must be tied up to prevent the pipes from rolling down and take corresponding protective measures. In addition, it is impossible to stand on the direction of the workpiece in and out of the material.
Link to this article：What are the main points of the laser pipe cutting machine
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cut Wiki，Thanks!^^